RenQuip AT Flange Alignment Tools

Mechanical and hydraulic tools that pull misaligned flanges into line with 18 to 90 kN, so bolts can go in or come out.

AT4

AT Series

AT tools correct linear misalignment, where the flange axes don't line up, and rotational misalignment, where the axes line up but the bolt holes don't. The tool pushes on the circumference of one flange while reacting against a bolt hole in the mating flange, replacing rigging and anchor points. The mechanical AT4K (40 kN) and AT4-1.8K (18 kN) are loaded with the torque wrench in the kit. The hydraulic AT9 gives 90 kN at 700 bar for medium and large flanges. The wing runs on roller bearings, so the tools can also hold alignment while a joint is being spread.

Key Features

Corrects two kinds of misalignmentCorrects or prevents linear misalignment (flange axes not aligned) and rotational misalignment (bolt holes not aligned).
18 to 90 kNAT4-1.8K: 18 kN at 30 Nm. AT4K: 40 kN at 68 Nm. AT9: 90 kN at 700 bar (10,000 psi)
Bolt holes from 15 mmMinimum bolt hole: 15 mm (AT4-1.8K), 22 mm (AT4K) or 35.5 mm (AT9).
Up to 85 mm misalignmentCorrects up to 62 mm (AT4 models) or 85 mm (AT9) of misalignment.
No rigging or anchor pointsReacts against the mating flange's bolt hole. A ratchet strap anchors the tool to the joint.
Works alongside flange spreadersThe wing runs on roller bearings, so the tool can stop misalignment during spreading. Designed for use with RenQuip flange spreaders.

Kits & Options

AT4-1.8K

Mechanical, 18 kN

Lighter-force mechanical tool for bolt holes from 15 mm.

In the box1 × AT4-1.8 tool 1 × torque wrench 1 × ratchet and strap, manual, carry case
Weight & Size12 kg (26.5 lbs) 580 × 340 × 180 mm
AT4-1.8K

Mechanical, 40 kN

Mechanical tool for small and medium flanges, bolt holes from 22 mm.

In the box1 × AT4 tool 1 × torque wrench 1 × ratchet and strap, manual, carry case
Weight & Size12 kg (26.5 lbs) 580 × 340 × 180 mm
AT9S

Hydraulic - Tool Only

90 kN hydraulic tool; needs a 700 bar pump and hose.

In the box1 × AT9 tool 1 × ratchet and strap, manual, carry case
Weight & Size26 kg (57.3 lbs) 920 × 510 × 210 mm
AT9K

Hydraulic Tool + Pump

90 kN hydraulic tool with matched hand pump, hose and gauge.

In the box1 × AT9 tool 1 × 700 bar sealed hand pump 1 × 700 bar hose (2.1 m) 1 × 700 bar gauge 1 × ratchet and strap, manual, carry case
Weight & Size26 kg (57.3 lbs) 920 × 510 × 210 mm

Applications

Inserting and removing flange bolts
Holding alignment while a flange joint is spread
ANSI B16.5 and B16.47 flanges, NPS 1½" to 60" (see RenQuip's application chart)
Small and medium flanges (AT4 models); medium and large flanges (AT9)
Remote locations (lightweight AT4 models)