FSW9 Mechanical Flange Spreading Wedge

A torque-wrench-operated mechanical wedge that opens flange joints from a 6 mm gap to 81 mm, with no hydraulics.

FSW9

The FSW9 is a mechanical flange spreading wedge that enters joints with as little as 6 mm access and pushes the faces apart with up to 94 kN per tool. A lead screw, turned with the torque wrench supplied in the kit, drives an internal wedge that opens the jaws in parallel, keeping full 15 mm step contact up to an 81 mm opening with stepped blocks. With no hydraulics, it is unaffected by ambient temperature and works in harsh environments. At 5.5 kg, it suits medium and small flanges. Two kits are available: single tool and twin tool.

Key Features

Enters 6 mm gapsFits flange joints with only 6 mm (0.24") access.
Mechanical, no hydraulicsA lead screw drives the wedge; operated with the 200 Nm torque wrench included in every kit.
94 kN per toolDelivers 94 kN (21,132 lbf) at the maximum torque of 200 Nm (150 ft·lb).
Spreads up to 81 mmBolt-on stepped blocks extend the opening to 81 mm (3.19").
Works in harsh environmentsMechanical operation is unaffected by ambient temperature.
Parallel jaw actionJaws open in parallel with full 15 mm step contact, keeping a secure grip and avoiding gasket pinching.

Kit Options

Single Tool Kit

FSW9K

Tools1 × FSW9
Torque Wrench1 × 200 Nm (150 ft·lb)
Drive Socket1 × 22 mm (1/2" drive)

Twin Tool Kit

FSW9D

Tools1 × FSW9
Torque Wrench2 × 200 Nm (150 ft·lb)
Drive Socket2 × 22 mm (1/2" drive)

Applications

Flange joint maintenance
Installation of flanged joints
Flange joint testing
Decommissioning
Harsh environments and extreme ambient temperatures
Remote locations (lightweight, no power source needed)
Medium and small flange joints