RenQuip PH Sealed Hydraulic Hand Pumps
Two-speed 700 bar hand pumps with a sealed reservoir that works in any position, for single- and double-acting tools.

PH Sealed Hydraulic Hand Pumps
Key Features
Sealed reservoir, any orientationNo air vent: no spills, no air in the system and no dirt from outside, even when the pump can't be kept level.
Two-speed pistonHigh-volume first stage up to 13.8 bar (197 psi) for fast advance, then a smaller stage that reaches 700 bar with less handle force.
Overpressure protectionInternal relief valve, factory set to the maximum safe working pressure.
Twin-port controlPHT pumps run two tools independently or together, with no separate manifold or extra hose.
Double actingPHD pumps have a 3-position lever to advance and retract double-acting tools and cylinders.
Tested and ready to connect100% pressure tested and certified. Supplied with gauge and 3/8" female half couplers.
Kits & Options

Single Port
One outlet for single-acting tools, spreaders and nut splitters.
ModelsPH300S
PH580S
PH1100S
In the boxPump,
1 × gauge
1 × gauge adaptor
1 × 3/8" female half screw coupler, manual

Twin Port
Two outlets with separate valves: run two tools independently or together.
ModelsPH300T
PH580T
PH1100T
In the boxPump
2 × gauges
2 × gauge adaptors
2 × 3/8" female half screw couplers, manual

Double Acting
Advance and retract ports for double-acting tools and cylinders.
ModelsPH300D
PH580D
PH1100D
In the boxPump
1 × gauge
2 × 3/8" female half couplers with dust caps, manual
Applications
Flange spreaders: one tool (PHS) or a pair (PHT)
Lifting with two cylinders while keeping the load level (PHT)
HNS nut splitters (PHS)
Double-acting tools and cylinders (PHD)
Limited-access areas where the pump can't be kept level
On site and in the workshop