RenQuip WJ19 Hydraulic Lifting Wedge Jack

Hydraulic wedge jacks that enter a 9.5 mm gap under a load and lift it up to 67.5 mm with 183 kN per tool.

WSJ19

WJ19

WJ19 enters the gap below a heavy load and pushes it up. That makes room for skates or another lifting device, or levels the load. One tool lifts 183 kN at 700 bar, from a 9.5 mm (0.37") gap up to 67.5 mm (2.66") with the stepped block. It works in any orientation, so it can also push or spread. Examples include aligning sections in construction, or opening flanges with different diameters or flanges on valve blocks. Three kits are available: tool only, integral pump, or twin tools with pump.

Key Features

Enters a 9.5 mm gapThe 9.5 mm (0.37") tip fits under loads with very little clearance.
183 kN per toolLifts 183 kN (41,140 lbf) at 700 bar (10,000 psi). Link several tools for more force.
Lifts up to 67.5 mmLifting range from 9.5 mm to 67.5 mm (2.66") with the stepped block fitted.
Works in any orientationLifts, pushes or spreads, as long as there is a surface to react against.
Stable contactForged steel jaws, 15 mm deep jaw steps and parallel action keep a secure grip.
Portable, no power source8.5 kg tool, driven by a hand pump or the integral pump, so no external power is needed.

Kits & Options

WJ19K

Single Tool

One wedge jack; needs a 700 bar pump and hose.

In the box1 × WJ19 tool, 1 × safety block 1 × stepped block with screw and hex key, manual, carry case
Weight & Size13 kg (28.7 lbs) 580 × 340 × 180 mm
WJ19P

Single Tool - Integral Pump

Pump built into the tool: no hoses or separate pump.

In the box1 × WJ19P tool with integral pump 1 × pump handle 1 × safety block 1 × stepped block with screw and hex key, manual, carry case
Weight & Size14 kg (30.9 lbs) 580 × 340 × 180 mm
WSJ19M

Twin Tool + Pump

Two jacks and a twin-port pump in one case.

In the box2 × WJ19 tools 1 × twin-port hand pump 2 × gauges 2 × safety blocks 2 × stepped blocks 1 × hex key, manual, carry case
Weight & Size13 kg 580 × 340 × 180 mm

Applications

Lifting and moving heavy workshop machinery, with skates
Levelling heavy gearboxes and process machinery
Pushing sections into alignment in construction
Flange spreading with dissimilar flange diameters or flanges on valve blocks
Remote locations